Instructions for Fitting A Fire Door
When a fire door is delivered, the accompanying documentation, which includes installation instructions, should also be included. So, when it comes to installing the fire door, make sure you properly follow all of the information stated or call one specialising in the installation of fire doors in the fitting instructions.
- Where can I find out if a fire door is certified?
Before installing a fire door, be certain that it is certified. By checking for a label or a plug, you should be able to determine its certification. The British Woodworking Federation (BWF) frequently uses labels for its Certifire scheme, whilst BM Trada uses colored plugs for its Q-Mark system. If you’re not sure what to look for, we recommend consulting this instruction on how to recognize a fire door.
- How to Properly Install Fire Doors
Only allow professional fire door installers to work on your fire door sets, according to experts. If this is not done correctly, the fitted fire-resistant doors may not comply with statutory standards and may not work properly in an emergency event.
During installation and maintenance of the door leaves, the manufacturer’s instructions or installation guide should be followed. The instructions will also specify when and how the door should be maintained.
The right safety signs should be used, and the code of practice for escape route signage, BS 5499-4:2013, should be referred to. The certification label must be examined on the door. The fire rating of the door, such as FD60, will be displayed on the label. It will also include a fire certificate number and the manufacturer’s name.
To comply with UK standards, fire door ironmongery must bear CE markings and be compliant. Hinges, locks, and door closers are examples of ironmongery. To meet with the fire door leaf certification label, they must all be firmly fastened and of the proper specification.
The necessary fire door requirements must be followed to guarantee compliance. The fire door frame must be rated the same as the door. To guarantee compatibility between the door frame and the doors, intumescent seals and cold smoke seals must be verified and specified accurately (fire door sets).
To demonstrate compliance with European requirements, fire-resistant glazing must have the CE label. When fitted, the space between the frame and the fire door must be between 2mm and 4mm, with 3mm being the aim for fire door installers.
- Gates for Fire Doors Installation Specifications
ISO 45001 Occupational Health and Safety, ISO 9001 Quality Management System, and ISO 14001 Environmental Management System certifications are required. Our fire door installation procedures are strong, proven, cost-effective, and ecologically friendly.
Experts Should collaborate with a variety of renowned fire door manufacturers and suppliers to provide a diverse choice of doors, including FD30 (designed to protect from fire and smoke for 30 minutes) and FD60 (designed to protect from fire and smoke for 60 minutes) (60 minutes). Our experts will ensure that the necessary doors are specified to guarantee compliance, as well as that the design of the door is consistent with your present aesthetics.
